Mold Cost Book

Mold Cost Book is run by Pufferfish LLC. We are not a mold remediation or water damage restoration company. We may later earn referral fees from partners; if so, we will say so on the page. That never changes the numbers we publish.

Water damage restoration cost

Short answer: Angi’s 2026 national average for water damage restoration is $3,904, based on 1,500 verified projects from Angi Pros. Most homeowners pay $1,409 to $6,400. Angi also states a wider overall range of $460 to $16,000, driven by water category and how saturated the materials are. If mold has started, Angi says to budget an additional $1,200 to $3,800 for mold removal; a later section of the same page puts mold removal at $2,225 on average and says fungal growth can begin within 24 to 48 hours, depending on the surface, material, and moisture levels.

Angi says water damage repair costs $3 to $7.50 per square foot on average. In the same factors section, a table lists clean water at $3.50, gray water at $5.25, and black water at $7.50. The table header on the national page does not say “per square foot,” but those figures sit next to the $3 to $7.50 per-square-foot statement and match that band. We treat them as the per-square-foot type rates Angi is presenting, and we flag the missing unit on the table header. Baltimore’s water-damage page is more explicit: it labels clean, gray, and black water as $2.50, $3.75, and $5.50 per square foot.

Cost by what is damaged (Angi national, 2026)

Type of repair (Angi national, 2026)Average cost
Roof$400–$2,000
Ceiling$450–$1,600
Appliance$175–$500
Basement$500–$2,800
Drywall$300–$850
Flooring$200–$3,000
Bathroom fixture$140–$800
Plumbing$350–$4,000
Mold removal$1,200–$3,800

Some of those rows (roof, plumbing, fixtures) are leak-source or rebuild costs Angi publishes on the same page.

Bathroom fixture (Angi national, 2026)Average repair cost
Leaky pipe$150–$350
Toilet$140–$400
Bathtub and shower$200–$800
Drains$200

Angi also says a 120-square-foot bathroom can cost up to $3,000 to clean and repair, that repairing a burst pipe and the associated damage costs $1,000 to $4,000, and that new plumbing can run $350 to $2,000. A sump pump is $50 to $400 for the unit alone, or about $1,200 installed.

For a city-level Maryland figure, Angi publishes Baltimore water-damage restoration at an average of $2,753, with a typical range of $778 to $4,727, and says that is 28% less than the national average. Details are on the Baltimore page and in the sources below. Angi has not published a comparable city page for Annapolis, Frederick, Columbia, or Salisbury that we could find on Nov 19, 2026.

Range calculator

This multiplies the area you enter by Angi’s national 2026 statement of $3 to $7.50 per square foot. It is arithmetic on that published range, not a quote. Water type and severity can put a job outside this band.

Before you hire

Related guides: mold remediation cost · basement mold · attic mold · crawl space mold · black mold · inspection and testing · water damage restoration · flooded basement cleanup

Maryland city pages: Baltimore · Annapolis · Frederick · Columbia · Salisbury

Sources

Last checked: Nov 19, 2026.